Sistemas‎ > ‎Linux‎ > ‎

Configurando um servidor Linux

- Instalar o Linux CentOS 6.4 64bits minimal
- Configurar a rede (eth0 local, eth1 velox)

  - /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=yes
    BOOTPROTO=none
    IPADDR=192.168.220.131
    NETMASK=255.255.255.0
    GATEWAY=192.168.220.250

  - /etc/sysconfig/network-scripts/ifcfg-eth1
    DEVICE=eth1
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=yes
    BOOTPROTO=dhcp

  - /etc/resolv.conf
    nameserver 8.8.8.8
    nameserver 8.8.4.4

- Desabilitar SELinux
  - /etc/selinux/config
    SELINUX=disabled

- /etc/hosts (Acrecentar o resultado do comando hostname)
  127.0.0.1 localhost ... nomedohost

- Instalar repositório YUM
  # yum install wget
  # wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm
  # rpm -ivh rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm
  # yum clean all
  # yum update

- Instalar pacotes do yum
  # yum install openssh-clients dhcp samba squid cups openvpn rp-pppoe vsftpd gcc make httpd gd gd-devel pcre pcre-devel man php ntpdate ntsysv bind chkconfig
  # chkconfig --levels 235 dhcpd on
  # chkconfig --levels 235 smb on
  # chkconfig --levels 235 squid on
  # chkconfig --levels 235 cups on
  # chkconfig --levels 235 openvpn on
  # chkconfig --levels 235 vsftpd on
  # chkconfig --levels 235 httpd on
  # chkconfig --levels 235 bind on

- Baixar o SARG
  # cd /root
  # wget http://sourceforge.net/projects/sarg/files/sarg/sarg-2.3.7/sarg-2.3.7.tar.gz/download

- Configurar a velox
  - Colocar no /etc/hosts o nome do servidor para o ip 127.0.0.1
  # pppoe-setup

- Testar o nat
  # iptables -F
  # iptables -X
  # echo "1" > /proc/sys/net/ipv4/ip_forward
  # iptables -t nat -A POSTROUTING -o ppp+ -s 192.168.0.0/24 -j MASQUERADE

- Configurar o DNS

- Configurar o Firewall

- Configurar o Squid
  # chmod 4755 /usr/lib64/squid/pam_auth

- Configurar o Sarg

- Configurar o DHCP

- Configurar o FTP

- Configurar o Samba

- Configurar o Cups

- Configurar o Openvpn

- Configurar o Apache


Habilitar os serviços para inicializarem automaticamente
  # ntsysv
Subpáginas (1): Habilitando debug do Squid
Comments